The Getecha pre-cutters cut thicker sheet edge trims directly at the extrusion line.
Typically two pre-cutters are mounted on an adjustment unit underneath the line. One cutter is used per edge strim. The cuts of the sheet fall onto a cross conveyor belt and are transported laterally out of the line.
The adjustment unit is adapted to the respective production machine so that the entire production width can be covered.
The length of the pre-cut parts depends on the line speed of the extrusion line and the number of strokes of the pre-cutter. The number of strokes of the cutters can be adapted to the line speed by a frequency converter.
Büchler GesmbH
Wipfinger Straße 23
3433 Königstetten
Austria